ENGINEERING LIBRARY
FRP Product Data Sheets
Product data sheets (PDS) for QuakeWrap® fabrics and laminates, QuakeBond™ resins and coatings, PileMedic® laminates and grouts, SPiRe® panels, StifPipe® and Form-A-Tube®. Each one gives the description, uses and material properties. Safety data sheets (SDS) are listed separately below.
- 29 data sheets, free to download
- Filter by product or material
- SDS for QuakeBond™ resins and grouts
Product Data Sheets (PDS)
Showing 32 data sheets
-
QuakeWrap® U20C Unidirectional Carbon Fabric
About 20 oz/yd² (678 g/m²), fibers in the 0° direction. Saturated in the field with QuakeBond™ 300SR.
Download PDS (PDF) -
QuakeWrap® U27C Unidirectional Carbon Fabric
High-modulus carbon fabric, 27.8 oz/yd² (943 g/m²). Saturated in the field with QuakeBond™ 300SR.
Download PDS (PDF) -
QuakeWrap® U41C Unidirectional Carbon Fabric
Heavy carbon fabric, 41 oz/yd² (1390 g/m²), fibers in the 0° direction.
Download PDS (PDF) -
QuakeWrap® B20C Biaxial Carbon Fabric
Equal strength in the 0° and 90° directions, 20 oz/yd² (678 g/m²).
Download PDS (PDF) -
QuakeWrap® U27G Unidirectional Glass Fabric
White glass fabric, 27 oz/yd² (915 g/m²). Saturated in the field with QuakeBond™ 300SR.
Download PDS (PDF) -
QuakeWrap® B26G Biaxial Glass Fabric
White biaxial glass fabric, 26 oz/yd² (881 g/m²).
Download PDS (PDF) -
QuakeWrap® B2408G Biaxial Glass Fabric
0°/90° E-glass fabric with a stitched glass mat for waterproofing.
Download PDS (PDF) -
QuakeWrap® B2610G Biaxial Glass Fabric
0°/90° E-glass fabric with a stitched glass mat for waterproofing.
Download PDS (PDF) -
QuakeWrap® CM13.5 Chopped Strand Mat
Random chopped E-glass for an impervious resin-rich layer in pipes, tanks and cooling towers, and for pile and column jackets.
Download PDS (PDF) -
QuakeWrap® L50C Carbon Laminate Strip
Unidirectional pultruded carbon laminate, bonded to concrete, wood or steel with QuakeBond™ 220UR.
Download PDS (PDF) -
QuakeWrap® GU50C Carbon Laminate Strip
Unidirectional pultruded carbon laminate bonded with QuakeBond™ 220UR. Data sheet dated October 2017, posted on the PileMedic® site. [Confirm with QuakeWrap: is GU50C still sold? The November 2020 L50C sheet has the same description and is the one on quakewrap.com's data sheet page, but the November 2024 PLG14.13 sheet still names GU50C]
Download PDS (PDF) -
QuakeBond™ 220TC Tack Coat Adhesive
Two-part structural epoxy adhesive with a 130-minute pot life for bonding FRP to concrete, masonry, wood, stone and steel.
Download PDS (PDF) -
QuakeBond™ 220UR Underwater Adhesive
Two-part structural epoxy adhesive with high tack in air and underwater.
Download PDS (PDF) -
QuakeBond™ 220UR-SC Slow Cure Underwater Adhesive
Underwater epoxy adhesive with a 90-minute pot life for longer working time.
Download PDS (PDF) -
QuakeBond™ 300SR Epoxy Saturant
Low-viscosity saturating resin for carbon and glass fabrics, 2:1 mix ratio by volume.
Download PDS (PDF) -
QuakeBond™ 320LV Moisture Tolerant Low Viscosity Epoxy
Gravity-feed epoxy that cures underwater. Also a binder for sand or aggregate fill in PileMedic® jackets.
Download PDS (PDF) -
QuakeBond™ 401HCR Chemical Resistant Novolac Epoxy
Zero-VOC epoxy novolac coating for tank linings. Can also saturate QuakeWrap® fabrics.
Download PDS (PDF) -
QuakeBond™ 401HCAR Abrasion and Chemical Resistant Novolac
Zero-VOC epoxy novolac coating for pipelines, channels and tank linings.
Download PDS (PDF) -
QuakeBond™ UVC UV Resistant Coating
Waterborne acrylic finish coat for FRP. Compatible with QuakeWrap® wet layup, SPiRe® and PileMedic®.
Download PDS (PDF) -
QuakeBond™ FRC UV Acrylic Paint
UV acrylic paint, per the product list on quakewrap.com. [Confirm with QuakeWrap: supply the FRC data sheet and SDS. quakewrap.com links only a "document coming soon" file, and no FRC sheet is in any QuakeWrap media library or in Wayback captures of quakewrap.com/product_data_sheets/]
File not posted yet -
PileMedic® PLG9.7 Biaxial Glass Laminate
Glass FRP laminate with a UV-protective gel coat on one face. Wrapped and bonded with QuakeBond™ 220UR.
Download PDS (PDF) -
PileMedic® PLG14.13 Biaxial Glass Laminate
Glass FRP laminate with a UV-protective gel coat on one face. Wrapped and bonded with QuakeBond™ 220UR.
Download PDS (PDF) -
PileMedic® PLG60.60 Biaxial Glass Laminate
Glass FRP laminate with strength in both directions for jackets around columns, poles and piles.
Download PDS (PDF) -
PileMedic® PLC100.60 Biaxial Carbon Laminate
High-modulus carbon FRP laminate with strength in both directions.
Download PDS (PDF) -
PileMedic® UW Grout Underwater Grout
Pumpable, washout-resistant, non-shrink cement grout for underwater and tidal-zone repairs, ½ in. to several inches thick.
Download PDS (PDF) -
PileMedic® UW Grout Additive Anti-Washout Admixture
Powder admixture that reduces washout of cement and mortar placed underwater.
Download PDS (PDF) -
PileMedic® UW Epoxy Grout Underwater Epoxy Grout
Three-component, 100% solids, moisture-insensitive epoxy grout that cures underwater. Poured into forms or pumped for encapsulation repairs of concrete, timber and steel.
Download PDS (PDF) -
SPiRe®+ Panel FRP Stay-in-Place Panel
Glass FRP panel with T profiles that lock into the new concrete. 3-ft (914 mm) wide panels for seawalls and bulkheads.
Download PDS (PDF) -
SPiRe® Panel High Strength FRP Panel
Fiberglass and structural-core panel for corrosion protection and repair of seawalls, sheet piles and bulkheads.
Download PDS (PDF) -
StifPipe® High Strength FRP Pipe
Lightweight sandwich-wall FRP pipe for sliplining, wet layup rehabilitation or new pipelines.
Download PDS (PDF) -
SuperLaminate™ and InfinitPipe® Data Sheets
[Confirm with QuakeWrap: supply current SuperLaminate™ and InfinitPipe® data sheets, or remove this card. None is posted on quakewrap.com, pilemedic.com or pipemedic.com (checked 10/21/2026). The only PipeMedic® laminate sheets found are four from 2010 (PC26.16, PC40.2, PG16.15 and PG5.5), seen only in a 2016 Wayback capture of pipemedic.com and no longer online]
File not posted yet -
Form-A-Tube® Reusable Column Form
UV-resistant PVC strips that snap together into a tube of almost any diameter and height. Remove and reuse, or leave in place.
Download PDS (PDF)
No data sheets match these filters.
SAFETY DATA SHEETS
Safety Data Sheets (SDS)
Two-part QuakeBond™ epoxies have one SDS for Part A and one for Part B. Fabrics, laminates and panels are listed with a PDS only.
Adhesives
Saturants, Coatings and Fillers
- QuakeBond™ 300SR Part A Epoxy saturant
- QuakeBond™ 300SR Part B Epoxy saturant
- QuakeBond™ 320LV Part A Low viscosity epoxy
- QuakeBond™ 320LV Part B Low viscosity epoxy
- QuakeBond™ 401HCR Part A Novolac coating
- QuakeBond™ 401HCR Part B Novolac coating
- QuakeBond™ 401HCAR Part A Abrasion-resistant novolac
- QuakeBond™ 401HCAR Part B Abrasion-resistant novolac
- QuakeBond™ UVC Single SDS
PileMedic® Grouts
Posted on the PileMedic® site.
Data Sheet FAQs
What is the difference between a PDS and an SDS?
A product data sheet (PDS) describes the product, its uses and its material properties. A safety data sheet (SDS) covers hazards, handling, storage and first aid. Two-part resins have a separate SDS for Part A and Part B.
Which resin saturates QuakeWrap® carbon and glass fabrics?
QuakeBond™ 300SR. Each fabric data sheet says the fabric is saturated in the field with 300SR. The 401HCR data sheet says it can also be used as a saturant for QuakeWrap® fabrics.
Which adhesive bonds the carbon laminate strips?
QuakeBond™ 220UR, according to the L50C and GU50C data sheets.
What fills the annular space in a PileMedic® jacket?
The data sheets list QuakeBond™ 320LV epoxy, alone or as a binder for sand or aggregate, and PileMedic® UW Grout, a washout-resistant underwater cement grout. PileMedic® UW Grout Additive reduces washout of cement and mortar placed underwater.
Do you make products that are not listed here?
Yes. The data sheet library covers the most commonly used products. QuakeWrap® also designs and manufactures custom products for specific project requirements.
Products in These Data Sheets
Need a Data Sheet We Have Not Posted?
Tell us about the structure. Our team will recommend the right QuakeWrap® system and provide data sheets and specifications for your engineer.